Iaw 59f Software
DOWNLOAD >>> https://bltlly.com/2t7kmJ
I/O Terminal is a software and hardware solution designed for work with a great number of ECUs, automatic transmissions,BSI installed in VAG, Mitsubishi, Mazda, Ford, Nissan, Subaru, Suzuki, Opel, Volvo, Alfa Romeo, Fiat, Jaguar, Land Rover, Lancia, Maseratti, Hyundai, Kia, Daewoo and other vehicles using the OBD-II data link connector.
The software is marketed on a module basis. Each module is a separate program which functions independently with one joint adapter. You can download and use only the software you have licenses on. Licenses are stored on special cards which are to be inserted in the special adapter slot before the software use. Some license can be recorded on one card, others require separate recording.
Reading/writing (64F7055, 64F7058, 64F7059 microcontrollers). FULL FLASH reading/writing; EEPROM reading/writing (usually). All operations are done via K-LINE or CAN by OBD or wired on the bench without opening the ECU. On some ECUs there are some extra functions like odometer calibration, pincode extraction and reset (virgin). Also software has FLASH memory CRC calculator.
Reading/writing of FIAT, FORD, PSA BSI modules made by DELPHI. Also software extracts PIN CODE and shows KEY PREPARATION DATA from the EEPROM dump or data flash dump.
The dedicated ABRITES key programming software for FCA vehicles enables you to program keys/transponders and remote controls for Fiat, Lancia, Alfa, Dodge, Chrysler, Jeep and IVECO vehicles. The ABRITES key programming solutions for FCA is immensely useful in ALL KEYS LOST situations. It allows PIN code reading and transponder programming/key learning for a large number of FCA vehicles, including ones produced after 2020 such as Alfa Romeo Giulia, Stelvio, Jeep Compass, Fiat 500x, Doblo, Fiorino and many others.Moreover, the software allows reading and updating the configuration data for a number of BCMs by OBDII. Additionally, the ABRITES key programming solutions for FCA include keys, developed and produced by our team, which you can see in Transponders and keys section.
Cluster calibration of Fiat/Lancia/Alfa/FCA vehicles can be performed using the ABRITES special function FN013 Instrument Cluster Data Manager. This software solution is dedicated to reading and updating the cluster-related configuration data and flash of these vehicles. It allows cluster calibration and updating Instrument cluster working data. BOOT MODE connection is sometimes required, in the cases when reading and updating via OBDII is inapplicable. 2b1af7f3a8